How to Paint a Room: 10 Actions to Painting Walls Like a DIY Pro
Find out how to paint a room in your home or apartment with these easy DIY actions and illuminate any area in no time
All items featured on Architectural Digest are independently selected by our editors. However, when you purchase something through our retail links, we might make an affiliate commission.
Painting a space is a popular job for beginning DIYers and veteran renovators alike. Read onto learn how to paint a room and see the steps you’ll need to follow to make sure your project is a success.
1. Strategy your approach
Start by thinking of how you want the completed project to remember and look that you’re not limited to four walls in the exact same color. Consider painting an accent wall in a bold color or highlighting moldings in a contrasting shade or finish. And do not forget to look up and see whether the ceiling might use a refresh as well.
2. Pick your color
Start by figuring out the basic color qualities: Do you desire a cool or warm shade? If you have existing furnishings or art, you’ll likewise want to consider how the shade will match them. Test the shades to see how they look in the space at various times of day.
Many paint companies also have tools on their websites that will let you upload an image of your area and preview various colors on the walls. Colors can look various in real-world conditions, so you’ll still need to try it out in the area.
3. Choose your products and tools
Every task is special and you might require different tools depending on the paint you choose and the condition of your walls, however there are a couple of must-haves.
- Paint roller
- Paint roller extension pole
- Ground cloth
- Paint brushes
- Paint tray
- Painter’s tape
- Putty knife
4. Figure out just how much paint you’ll need
Whether you’re painting a powder room or the outside of your house, the general guideline is one gallon per 400 square feet, states Carl Minchew, vice president of color development and design at Benjamin Moore. That’s just a rough standard: To get a more precise number, which you’ll certainly desire for large projects, utilize a paint calculator like the ones supplied by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. (And both assume two coats of paint per job.).
On the other end of the spectrum, a deep color base tends to require more coats of paint than a lighter color, says Carolyn Noble, color marketing and design manager at Pratt & Lambert. She suggests using a gray tinted guide to the surface area before you paint your walls a saturated color to help lower the number of applications.
If you’re painting a highly textured surface area instead of a smooth one, buy a little additional, says Julianne Simcox, Pratt & Lambert associate brand name supervisor. Cabinets with complicated millwork require more paint, too; Minchew recommends purchasing about 10 percent more than calculated.
Whether you’re painting a powder room or the outside of your house, the basic rule of thumb is one gallon per 400 square feet, states Carl Minchew, vice president of color development and style at Benjamin Moore. That’s simply a rough standard: To get a more exact number, which you’ll certainly want for big jobs, use a paint calculator like the ones supplied by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. On the other end of the spectrum, a deep color base tends to require more coats of paint than a lighter color, states Carolyn Noble, color marketing and design manager at Pratt & Lambert. She suggests applying a gray tinted guide to the surface prior to you paint your walls a saturated color to help lower the number of applications.
5. Preparation the walls and the room
You do not wish to damage your preferred sofa or that treasure Grandma provided you, so empty the room of all the furnishings. If you don’t have enough space, push whatever to the. Cover the pieces with a ground cloth or lightweight plastic sheeting and do the exact same with the floor. “Don’t avoid the drop cloth, paint will splatter, we guarantee,” say New Jersey– based specialists– and cousins– John Colaneri and Anthony Carrino, the stars of renovation series Strategy on Ellen DeGeneres’s Ellen Digital Network.
“Getting a good seal so paint does not get under the tape is whatever, plus it will pull away clean after whatever is dry,” they state. Get rid of outlet and light switch covers and use painters tape to protect outlets and switches from paint drips.
6. Mix your paint
Use a wooden paint adhere to stir the paint, and re-stir frequently throughout the project. Integrate the cans in a big bucket in case there is a small variation in color if you’re utilizing more than one gallon of paint.
7. Pick your painting methods
Paint the adjacent light-color walls. “Don’t fret if you get paint on what will be your accent wall– the dark paint will cover up whatever lighter paint discovered its way there. After the lighter wall dries, tape off that ledge so the dark color doesn’t bleed onto your new paint,” Colaneri and Carrino advise.
Take a brush and “cut in”– paint along the molding and the corners from top to bottom– while your pal utilizes a roller to cover the main expanse of the wall, staying away from those more exact areas. When using paint with the roller, use long strokes in a W pattern for ample coverage (and to avoid those bothersome roller marks).
If you are painting the trim, remove the painter’s tape and wait for the walls to dry, before applying tape to the walls. Start with the trim closest to the ceiling, carrying on to door and window frames, and finally the baseboards.
8. Do not forget ventilation
Ensure your area is well-ventilated throughout the job by opening windows and using fans.” Keeping the room warm and a fan blowing definitely helps speed up the drying process,” state the cousins. “If it’s a wet day, it will take much longer for the paint to dry.”
“Do not stress if you get paint on what will be your accent wall– the dark paint will cover up whatever lighter paint discovered its way there. After the lighter wall dries, tape off that ledge so the dark color doesn’t bleed onto your brand-new paint,” Colaneri and Carrino advise. Take a brush and “cut in”– paint along the molding and the corners from top to bottom– while your good friend utilizes a roller to cover the primary expanse of the wall, remaining away from those more accurate spots.
9. Tidy up
You have actually done several coats, but it’s not time to relax just. Eliminate all painters tape and gather drop clothing, making certain any spills or splatters are dry before you move them. For latex- and water-based paints, tidy brushes with soap and water, while oil-based paints will require mineral spirits. You can utilize a painter’s brush to clean and improve bristles. Utilize the curved edge of a 5-in-1 tool to get rid of the paint under running water if you desire to recycle roller covers.
10. Provide yourself enough time
The amount of time your job will take depends on the size of your space, how you’re painting, and your skill level. Using a dark shade on the walls and painting the ceiling and cut will take longer than simply doing the walls in a neutral.
* NOTE: Combine the our painters dublin service with house painting, commercial painting, furniture painting,wallpapering, plastering services, spray painting and benefit from our discounts. Or just simply contact us for a free quote. Please also have a look at our amazing testimonials and gallery. Our sitemap, about us and blog.
Areas We Cover (AlexTrendPainters.ie)
Learn More About Painting and Painters