How to Paint a Room: 10 Actions to Painting Walls Like a DIY Pro
Discover how to paint a space in your home or home with these easy DIY steps and illuminate any space in no time
All products featured on Architectural Digest are separately selected by our editors. When you buy something through our retail links, we may make an affiliate commission.
Painting a room is a popular job for starting DIYers and veteran renovators alike. It’s quite pain-free, relatively economical, and ought to something go badly wrong, easy to repair. However prior to you get your roller and start, it is essential to have a plan of attack. Continue reading to find out how to paint a room and see the steps you’ll need to follow to make certain your job is a success.
1. Plan your technique
Start by thinking of how you desire the finished project to remember and look that you’re not restricted to four walls in the exact same color. Think about painting an accent wall in a bold hue or highlighting moldings in a contrasting shade or finish. And don’t forget to look up and see whether the ceiling could use a refresh.
2. Choose your color
Start by figuring out the general color characteristics: Do you want a warm or cool shade? If you have existing furniture or art, you’ll also want to think about how the shade will match them. Check the tones to see how they look in the room at various times of day.
Lots of paint business likewise have tools on their sites that will let you publish a picture of your space and preview different colors on the walls. Colors can look various in real-world conditions, so you’ll still require to try it out in the space.
3. Pick out your products and tools
Every job is unique and you might require various tools depending upon the paint you pick and the condition of your walls, but there are a few must-haves.
- Paint roller
- Paint roller extension pole
- Drop cloths
- Paint brushes
- Paint tray
- Painter’s tape
- Putty knife
4. Identify how much paint you’ll need
Whether you’re painting a powder room or the exterior of your house, the basic guideline is one gallon per 400 square feet, says Carl Minchew, vice president of color innovation and style at Benjamin Moore. That’s just a rough standard: To get a more exact number, which you’ll certainly want for big tasks, use a paint calculator like the ones supplied by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. (And both presume 2 coats of paint per job.).
On the other end of the spectrum, a deep color base tends to need more coats of paint than a lighter color, says Carolyn Noble, color marketing and style supervisor at Pratt & Lambert. She recommends applying a gray tinted primer to the surface before you paint your walls a saturated color to assist decrease the number of applications.
If you’re painting an extremely textured surface instead of a smooth one, buy a little additional, says Julianne Simcox, Pratt & Lambert associate brand supervisor. Cabinets with complex millwork need more paint, too; Minchew recommends buying about 10 percent more than computed.
Whether you’re painting a powder space or the exterior of your house, the general rule of thumb is one gallon per 400 square feet, says Carl Minchew, vice president of color innovation and design at Benjamin Moore. That’s simply a rough guideline: To get a more accurate number, which you’ll certainly want for large tasks, utilize a paint calculator like the ones provided by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. On the other end of the spectrum, a deep color base tends to require more coats of paint than a lighter color, says Carolyn Noble, color marketing and design supervisor at Pratt & Lambert. She recommends applying a gray tinted primer to the surface area prior to you paint your walls a saturated color to assist reduce the number of applications.
5. Preparation the walls and the space
You do not want to damage your preferred sofa or that treasure Granny offered you, so empty the space of all the furnishings. “Don’t skip the drop cloth, paint will splash, we assure,” state New Jersey– based contractors– and cousins– John Colaneri and Anthony Carrino, the stars of restoration series Grand Style on Ellen DeGeneres’s Ellen Digital Network.
“Getting a good seal so paint does not get under the tape is whatever, plus it will pull away clean after everything is dry,” they state. Remove outlet and light switch covers and use painters tape to protect outlets and switches from paint drips.
6. Mix your paint
Use a wood paint stay with stir the paint, and re-stir typically throughout the task. If you’re utilizing more than one gallon of paint, integrate the cans in a large container in case there is a slight variation in color.
7. Pick your painting strategies
Paint the adjoining light-color walls. “Don’t fret if you get paint on what will be your accent wall– the dark paint will cover up whatever lighter paint found its method there. After the lighter wall dries, tape off that ledge so the dark color does not bleed onto your brand-new paint,” Colaneri and Carrino encourage.
Take on one wall at a time. Take a brush and “cut in”– paint along the molding and the corners from top to bottom– while your good friend uses a roller to cover the primary stretch of the wall, staying away from those more accurate areas. When using paint with the roller, use long strokes in a W pattern for ample protection (and to prevent those bothersome roller marks). As soon as the wall is dry to the touch, it’s ready for a second coat.
If you are painting the trim, remove the painter’s tape and await the walls to dry, before applying tape to the walls. Start with the trim closest to the ceiling, carrying on to door and window frames, and finally the baseboards.
8. Do not forget ventilation
Ensure your area is well-ventilated throughout the task by opening windows and using fans.” Keeping the room warm and a fan blowing absolutely assists speed up the drying process,” say the cousins. “If it’s a moist day, it will take a lot longer for the paint to dry.”
“Do not worry if you get paint on what will be your accent wall– the dark paint will cover up whatever lighter paint found its method there. After the lighter wall dries, tape off that ledge so the dark color does not bleed onto your new paint,” Colaneri and Carrino advise. Take a brush and “cut in”– paint along the molding and the corners from leading to bottom– while your buddy utilizes a roller to cover the primary stretch of the wall, staying away from those more accurate areas.
9. Clean up
You have actually done several coats, however it’s not time to relax just yet. Eliminate all painters tape and collect drop clothes, ensuring any spills or splatters are dry before you move them. For latex- and water-based paints, tidy brushes with soap and water, while oil-based paints will need mineral spirits. You can use a painter’s brush to clean and reshape bristles. If you wish to recycle roller covers, use the curved edge of a 5-in-1 tool to eliminate the paint under running water.
10. Give yourself enough time
The amount of time your project will take depends on the size of your space, how you’re painting, and your skill level. Utilizing a dark shade on the walls and painting the ceiling and cut will take longer than simply doing the walls in a neutral.
* NOTE: Combine the our painters dublin service with house painting, commercial painting, furniture painting,wallpapering, plastering services, spray painting and benefit from our discounts. Or just simply contact us for a free quote. Please also have a look at our amazing testimonials and gallery. Our sitemap, about us and blog.
Areas We Cover (AlexTrendPainters.ie)
Learn More About Painting and Painters