do you need to paint a wall two times

  • by
do you need to paint a wall two times

How to Paint a Room: 10 Actions to Painting Walls Like a DIY Pro

Find out how to paint a room in your house or apartment with these simple Do It Yourself steps and brighten up any space in no time

All items featured on Architectural Digest are separately selected by our editors. However, when you purchase something through our retail links, we might earn an affiliate commission.

Painting a room is a popular project for beginning DIYers and seasoned renovators alike. Read onto find out how to paint a space and see the actions you’ll require to follow to make sure your job is a success.

1. Plan your approach

Start by considering how you want the ended up task to remember and look that you’re not limited to four walls in the same color. Think about painting an accent wall in a vibrant hue or highlighting moldings in a contrasting shade or finish. And don’t forget to search for and see whether the ceiling might utilize a refresh also.

2. Select your color

Start by figuring out the basic color attributes: Do you want a warm or cool shade? If you have existing furniture or art, you’ll also desire to think about how the shade will compliment them. Check the tones to see how they look in the space at different times of day.

Lots of paint business likewise have tools on their sites that will let you submit an image of your area and sneak peek different colors on the walls. Colors can look different in real-world conditions, so you’ll still need to attempt it out in the area.

3. Choose your tools and materials

Every task is special and you might need different tools depending on the paint you pick and the condition of your walls, however there are a few must-haves.

  • Paint
  • Paint roller
  • Paint roller extension pole
  • Ground cloth
  • Paint brushes
  • Paint tray
  • Sandpaper
  • Painter’s tape
  • Rags
  • Putty knife

painters dublin

4. Determine just how much paint you’ll need

Whether you’re painting a powder room or the exterior of your house, the basic guideline is one gallon per 400 square feet, states Carl Minchew, vice president of color development and design at Benjamin Moore. However that’s just a rough standard: To get a more exact number, which you’ll definitely want for large tasks, use a paint calculator like the ones supplied by Benjamin Moore or Pratt & Lambert; they take into consideration window and door measurements. (And both presume two coats of paint per project.).

On the other end of the spectrum, a deep color base tends to need more coats of paint than a lighter color, says Carolyn Noble, color marketing and design manager at Pratt & Lambert. She advises applying a gray tinted primer to the surface prior to you paint your walls a saturated color to help minimize the number of applications.

If you’re painting an extremely textured surface instead of a smooth one, buy a little extra, states Julianne Simcox, Pratt & Lambert associate brand name manager. Cabinets with complicated millwork require more paint, too; Minchew suggests purchasing about 10 percent more than computed.

Whether you’re painting a powder room or the exterior of your house, the basic rule of thumb is one gallon per 400 square feet, says Carl Minchew, vice president of color development and design at Benjamin Moore. That’s simply a rough standard: To get a more exact number, which you’ll definitely want for big tasks, use a paint calculator like the ones supplied by Benjamin Moore or Pratt & Lambert; they take into account window and door measurements. On the other end of the spectrum, a deep color base tends to require more coats of paint than a lighter color, says Carolyn Noble, color marketing and style manager at Pratt & Lambert. She advises applying a gray tinted guide to the surface prior to you paint your walls a saturated color to assist minimize the number of applications.

5. Preparation the walls and the room

You don’t want to damage your preferred sofa or that treasure Granny provided you, so empty the space of all the furnishings. Push whatever to the center if you don’t have sufficient space. Cover the pieces with a ground cloth or lightweight plastic sheeting and do the same with the floor. “Do not avoid the drop cloth, paint will splatter, we promise,” say New Jersey– based contractors– and cousins– John Colaneri and Anthony Carrino, the stars of restoration series Strategy on Ellen DeGeneres’s Ellen Digital Network.
“Getting a good seal so paint does not get under the tape is whatever, plus it will pull away clean after everything is dry,” they say. Eliminate outlet and light switch covers and use painters tape to safeguard outlets and switches from paint drips.

6. Mix your paint

Use a wood paint adhere to stir the paint, and re-stir typically throughout the task. If you’re using more than one gallon of paint, combine the cans in a large bucket in case there is a small variation in color.

7. Choose your painting techniques

Your paint is combined and your roller is at the prepared, but ensure to prepare a technique prior to you get going. Work from the top of the room down, starting with the ceilings. Preparation a bold focal wall? Paint the adjacent light-color walls. “Don’t fret if you get paint on what will be your accent wall– the dark paint will conceal whatever lighter paint discovered its method there. After the lighter wall dries, tape off that ledge so the dark color doesn’t bleed onto your new paint,” Colaneri and Carrino advise. If you’re concealing dark walls with a brighter hue, plan on 3 coats: your guide, plus 2 coats of the new color to ensure nothing shows through.
Tackle one wall at a time. Take a brush and “cut in”– paint along the molding and the corners from top to bottom– while your friend utilizes a roller to cover the main stretch of the wall, keeping away from those more accurate spots. When applying paint with the roller, use long strokes in a W pattern for adequate coverage (and to prevent those pesky roller marks). When the wall is dry to the touch, it’s ready for a second coat.

If you are painting the trim, eliminate the painter’s tape and wait for the walls to dry, before using tape to the walls. Start with the trim closest to the ceiling, carrying on to door and window frames, and finally the baseboards.

8. Don’t forget ventilation

Ensure your space is well-ventilated throughout the project by opening windows and utilizing fans.” Keeping the room warm and a fan blowing absolutely helps accelerate the drying procedure,” say the cousins. “If it’s a moist day, it will take much longer for the paint to dry.”

“Don’t stress if you get paint on what will be your accent wall– the dark paint will cover up whatever lighter paint found its way there. After the lighter wall dries, tape off that ledge so the dark color doesn’t bleed onto your brand-new paint,” Colaneri and Carrino recommend. Take a brush and “cut in”– paint along the molding and the corners from top to bottom– while your friend uses a roller to cover the primary expanse of the wall, remaining away from those more exact spots.

9. Clean up

For latex- and water-based paints, clean brushes with soap and water, while oil-based paints will need mineral spirits. If you want to recycle roller covers, utilize the curved edge of a 5-in-1 tool to eliminate the paint under running water.

10. Give yourself enough time

The quantity of time your task will take depends on the size of your room, how you’re painting, and your skill level. Utilizing a dark shade on the walls and painting the ceiling and trim will take longer than just doing the walls in a neutral.

* NOTE: Combine the our painters dublin service with house paintingcommercial paintingfurniture painting,wallpapering, plastering services, spray painting and benefit from our discounts. Or just simply contact us for a free quote. Please also have a look at our amazing testimonials and galleryOur sitemapabout us and blog.

Areas We Cover (AlexTrendPainters.ie)

Areas We Cover

Related Articles

Learn More About Painting and Painters